Soil Moisture Meter, pH Tester, and Hydrometer for Plants, Gardens, and Farms

Revised Content:

Product Description Tips: 1. Avoid using the soil moisture probe to test very hard soil. 2. Do not leave the probe in the soil for extended periods. 3. Never use the probe to test water or other liquids. It is designed solely for soil testing. 4. After use, please wipe the soil moisture probe clean.

How to Use: 1. Clean the probe and switch it to the desired mode (moisture, pH, or light) based on your requirements. 2. Insert the probe into the soil, about 2-4 inches deep. 3. No need to wait – the readings for moisture, pH, and light intensity can be checked immediately on the dial. 4. Remove the probe from the soil and wipe it clean after each use.

Watering Guide Notes: 1. The ranges listed in the plant watering guide indicate that if the meter reads above the listed range, it is too early to water your plants. 2. If the meter reads the same or lower than the listed range, the plant needs watering.

Functions: 1. Test the soil moisture: Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET). If the soil is too dry, please use the soil sensor after moderate watering before measurement. 2. Test the pH of the soil: pH Range: 3.5-8 pH (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI). Designed for soil and cannot directly measure liquids. Since soil is most often in a neutral state (pH 7), the needle may stay still when testing soil pH. 3. Test the light intensity: Relative Light: 0-2000 lux (0-200 LOW, 200-500 LOW+, 500-1000 NOR, 1000-2000 HGH). Do not cover the light sensor during the test.

The revised content maintains the original meaning while enhancing the reading experience through improved sentence structure and clarity. The word count remains within the 500-word limit.

product information: